cold room, cold room door, PU panel,refrigerators

Cold Room/Cooler Room/Freezer Room

Cold Room Door:

1.Semi-Sunk/Full-Sunk Swing/Hinge Door are revolving, single-wing type with an opening section of 700 X 1950, 800 X 1950, 900 X 1950 mm or other required size, mounted in a separate panel with the direct injecting by Polyurethane Foam inside covered with the pre-painted steel sheet or Stainless Steel on both surfaces coated with PVC protected film together with the reinforced & insulated door frame.2. Manual/Electric Sliding Door can be produced with the various opening section according to the required size with the direct injecting by Polyurethane Foam inside covered with the pre-painted steel sheet or Stainless Steel on both surfaces coated with PVC protected film together with the light duty aluminum upper sliding truck and inside safety release system.3. The door lock is provided with a magnetic gasket and can be opened from the inside even when it is locked. For the low temperature cold rooms electric heating is provided along the sealing perimeter, in order to prevent the door from freezing.

Polyurethane sandwich panels:

Polyurethane foam sandwich panel is fit for the

projects which have serious require of keeping

warm.

Polyurethane sandwich panels are made by upper

and lower layers pre-painted galvanized steel

sheets or stainless steel, to the middle infused

polyurethane foam, through the heating, pressure,

and the formation of foam sandwich panels. The

metal top layer can be a colored stencil plate, the

surface is smooth and the whole performance is

excellent.

Polyurethane core sandwich panel is universally

acknowledged the best material of heat insulation

and heat preservation nowadays and it can perform a good anticorrosion, antirust and anti-weathering

Parameters:

Available Panel Thickness: 50mm, 75mm, 100mm, 120mm, 150mm, 175mm and 200mm

Surface of Panels: to be plating 0.4mm, 0.5mm or 0.6mm thickness pre-painted white hot galvanized steel sheet, aluminum sheet or stainless steel sheet.

Panel Available Width: 500mm - 1200mm

Panel Available Length: 2000mm-12000mm

PU Material Origin: Germany, Japan or Korea

PU Density: 40 KGS/M3

cold room, cold room door, PU panel,refrigerators